What Causes Cloudy Water in a Swimming Pool

It is the sign of a healthy pool: bright and glimmering water. But cloudy water is a pretty typical problem that will make your pool look unsafe and unappealing. Any good pool owner needs to know what causes cloudy water in swimming pools and how to fix it. So, let us check out the biggest factors responsible for this issue and how you can keep your pool water very clear.

Physical FactorsSuspended Particles

One of the major reasons a pool gets cloudy is because of suspended particles. Although what makes up these particles can vary greatly, some common sources include:

External Debris

Leaves, twigs, dirt, and pollen carried into the pool by wind and rain. Trees and plants near pools are especially susceptible to this problem. All these particles keep floating in water, making it muddy.

Contaminants Brought by Swimmers

There are lots of things that can make your pool’s water cloudy: body oils, sweat and lotions; hair products. That’s how come over time, silt and dirt start to build up in the water turning it a dirty brown.

Inadequate Filtration

systems get rid of all debris, contaminants, and unnecessary hazards in your swimming area–and other work as well. The accumulated particles and impurities settle on the water’s surface which leads to cloudy irrigation results when working correctBut when these fans aren’t operating properly. If the filter is congested, or if it has not been changed in some time due to poor performance, debris of any size is likely evading removal. Most critical with regards to filtration issues include:

Clogged Filters: Dirt, leaves, and other sediment can block filters, prompting limited sanitation efficiency.

Improper Maintenance: If you do not maintain a proper cleaning schedule, your in-tank fuel filter will get dirty and decrease flow.

Not Running the Filtration Long Enough Each Day: When you only run the filtration for a few hours each day, it cannot filter out all of the particles in your hot tub waters.

Filtration: As with the best home water filtration systems, it is so important to replace your overused or damaged filters.

Prevention and Management

Properly maintaining your pool filtration system safely ensures maximum efficiency:

Regular Cleaning: Clean the filter routinely to rid debris that has been captured.

Replace Filters: When worn or broken, replace them as soon as you can.

Sufficient Filtration Time: Run the filtration system for at least 8-12 hours per day to properly clean.

Get It Inspected: Make it a point that your water plan gets inspected from time to make sure the filtering is in full operation mode.

Poor Water Circulation

Poor water circulation is the next main contributor to cloudy pool water. Good circulation is necessary for the thorough distribution of chemicals, debris filtration, and to prevent dead spots where algae and bacteria can collect. There are several aspects that can all cause bad water circulation in your swimming pool:

Causes of Poor Water Circulation

Faulty Pool Pump: The size of any pump has been adapted to specific quality and quantity while it is kept for replacement with genuine ones.

Blocked/Dirty Skimmers and Returns: If the skimmer or return jets are blocked, this can disrupt water flow.

Misplaced Returns: If some of the returns are in a position that is not ideal, it can cause dead spots where water does not flow correctly.

Debris in the Pool Plumbing: Debris in the pool plumbing can clog pipes, restrict water flow, and make circulation inefficient.

Prevention and Management

Some of the measures you can take to ensure proper water circulation includes:

Regular Pump Maintenance: Ensure your pool pump is in good working condition by regularly checking and servicing it.

Skimmers and Returns: Clean skimmer baskets and return jets on a routine basis to help prevent them from clogging.

Acquired Alignment of Returns: Position returns to optimize water movement while minimizing the presence of dead spots.

Clean Plumbing: Remember to check the plumbing and clear any dirt in there at times to keep flow up.

Biological FactorsAlgae Growth

Algae can spread rapidly in unclean pools, often turning the water green and cloudy. In poorly maintained pools, you can have green algae or black algae and other types of algae. Algae blooms not only make the housing pool water appear unattractive but can also cause slippery surfaces and require additional chlorine.

Bacteria and Microorganisms

This causes cloudiness and bacteria growth if not disinfected properly. Sources of fecal bacteria such as E. coli and other pathogens are introduced to the pool through swimmers, or from out-of-basin sources like contaminated water, rain-induced runoff wash offs animal waste, etc. Chlorine at the right levels, combined with shock treatments: You need to kill those little nasties and any run off can get your water cloudy.

Environmental FactorsWeather and Climate Effects

Cloudiness may occur when rain, wind, or temperature shifts introduce contaminants which influence the water chemistry. Not only does rain water bring in dirt, pollen, and other debris into the pool but also; wind can carry leaves dust with it. Changes in temperature can also influence the balance of your sanitizers and other chemicals, contributing to cloudy water.

Pool Surroundings

Now, things like nearby trees and plants that shed (such as pine needles) or areas with heavy foot traffic can easily introduce plant debris and organic material into the pool in short order, making it cloudy. The pool can catch leaves, branches, and petals from the local vegetation nearby; or it also accumulates dirt and small debris that people carry walking around it. Trimming trees and cleaning the area surrounding your pool can prevent a lot of debris from entering the water. Keep control over what happens around it!

Solutions and Preventive MeasuresMaintain Good Filtration and Circulation Systems

Clean and maintain your filter/pump. Have the filtration system running at a high enough rate so that it is filtering your pool for most of 24 hours to maintain clear water. This also makes sure that there are no dead zones where contaminants and bacteria can multiply.

Recommended Product: Pool Robotics Cleaner

You can clean the pool water with a robotic pool cleaner, such as the Beatbot AquaSense Pro that will even clarify the water and sweep all particles on your pool floor automatically. Beatbot AquaSense Pro is a All-round cleaner with five cleaning modes, cordless, up to 9 hours of battery life, and a 2-year warranty. It offers the most features, including automatic clarifying,smart return,water surface cleaning, cordless operation.

Correct Chemical Balance

You are required to test and balance the pH, total alkalinity, and calcium hardness levels of your swimming pool regularly. Keep sanitation proper with chlorine or whatever needed to keep a good chemical balance. This is important because it stops algae from growing and kills bacteria which can cause the water to become cloudy.

Control Algae and Microorganisms

Algaecides should be used to avoid algae and ensure chlorine levels, which will kill off bacteria as well other microorganisms. Scrub the pool floor and walls for biofilm or algae formation. For deep cleaning, shock treatments can also be applied.

Environmental Management

Keep your pool clean by removing debris and organic matter from the area around it. Cut down trees and vegetation close to the roof which may cause leaves, a big branch, or twigs from falling. Using a pool cover when the pool is not being used, will also help in maintaining clean water .


Physical, chemical, biological, and environmental causes can result in clouded pool water. These causes can help you with which solution to treat and reserve the swimming pool as a clear and welcoming one. 

Beatbot ‘s products such as AquaSense Pro can help transform what is often considered to be a grueling chore of pool maintenance into simple work, and your pool water will turn crystal clear soon.


Back to top button